There are 226 entries in 23 pages and you are on page number 8 |
|
Comments by
Jenn on Thursday, July 23, 2009 at 01:01 |
IP Logged |
|
I just did an airbox mod and now I am not sure how to reprogram for the fuel as suggested in your directions +5 +10 +5, can you help me with this?
Chuck: You need a "Yosh Box" to do this. I have one and can remap (program) your ECU for you. Do a search for "FREE ECU" on tlplanet.com or tlzone.net and you will find my instructions to get your ECU mapped for free. |
| United States |
no URL given |
|
|
Comments by
Zedrick on Thursday, July 09, 2009 at 22:05 |
IP Logged |
|
Hi Chuck. I sync my TB & TPS and checked for Vac leaks. Its still cutting of at around 226 & running ruff after. There any thing else u can think of?
Chuck: If it is an R check the secondary injectors. Make sure your electrical connections are good for the coils. Also try changing your plugs. |
| United States |
no URL given |
|
|
Comments by
James on Monday, June 29, 2009 at 17:07 |
IP Logged |
|
Hi Chuck,
Thanks again for taking the time to help me flash my computer for the TL. She's running great!
Take care,
James
Chuck: You're welcome  |
| United States |
no URL given |
|
|
Comments by
LopezInOz on Monday, June 29, 2009 at 04:04 |
IP Logged |
|
Hey Chuck wanted to say Thank you U saved my ass & my TL I used ur Hydraulic Clutch Bleeding to fix my clutch problem Thank You Again 
Chuck: Great -glad it helped |
| Australia |
no URL given |
|
|
Comments by
jeremy on Friday, June 26, 2009 at 12:27 |
IP Logged |
|
do remapping need help i live in ct in mansfield in the area can i give u my number so i contact u email jfl***@tmail.com il send my #number
Chuck: my Email is on my main page (chucksirois.com) Drop me an email and we can arrange a time. |
| United States |
no URL given |
|
|
Comments by
James Hartline on Wednesday, June 24, 2009 at 20:25 |
IP Logged |
|
I did the fuel filter mod a month or so ago, but today is the 1st time I've ridden the bike. Now my fuel light is always on even though I can see fuel sloshing around close to the top. It also just died while coming to a light, so I'm afraid something is wrong :( I remember that plastic thingy that goes over the whole fuelpump assembly...could putting that on wrong have caused my issue? It either sat one way or another, then how high or low its supposed to sit over it all. It's back on to where I was able to redo the ziptie, so ho far its slid on I would assume is ok. I'm hoping that once I leave WalMart here that I'm not going to get stranded!
Chuck: Sounds like the rubber boot may be on wrong. I think I have heard that some folks leave it off when they replace the fuel filter. I put mine back and putit on as far as I could which is only about 80-90% of how it was stock. There is a sensor inside thepump that tells the bike when fuel is low. I think I would recheck the connection to the fuel pump first -clean them up. Also replace your fuel pump relay. |
| United States |
no URL given |
|
|
Comments by
Zedrick on Friday, June 19, 2009 at 22:09 |
IP Logged |
|
Hello, It is runs good until it warms up then it cuts off but it strats right back up. It runs good as long as I'm riding but at stop it my shut off.
Chuck:I would look for a vacuum leak first. Sync your TBs and set your TPS. If that doesn't work do the normal maintenance including the TRE. Maybe you are running a cold or neutral map all the time? (bad TRE?) Go from there, good luck! |
| United States |
http:/ |
|
|
Comments by
PAUL ROCHESTER on Wednesday, June 17, 2009 at 04:29 |
IP Logged |
|
hi chuck im amazed by your knowledge of tlr and am lookin for expertise advise from you do you have a email address i can send my info to you
thanks
Chuck: My regergitated TL knowledge -thanks! lol -on the left of the main page of chucksirois.com is a link to email me |
| United Kingdom |
no URL given |
|
|
Comments by
James on Sunday, May 31, 2009 at 20:06 |
IP Logged |
|
Chuck, great page! I did the electrical fix from your site when I was having problems and the bike couldn't be better! Seems more power too.. Thanks
Chuck: Hi James! Glad the fix worked for you. |
| Canada |
no URL given |
|
|
Comments by
ERIC on Wednesday, May 27, 2009 at 01:29 |
IP Logged |
|
LOOKING FOR MOUNTING LOCATIONS FOR SHOGUN SLIDERS on TLR. found once on TLZONE but cant find it again
Chuck: Hey Eric, I have never put in sliders -only stunt cages. TLzone, TLplanet, ebay search would be good. |
| United States |
no URL given |
|
|